发新帖

[欧洲|VDE] 2016线缆阻燃研讨会20-Documentation 文件

[提交至百度]
时间:2017-4-2 22:25 0 296 | 复制链接 |

1分钟快速注册,QQ|微信|百度|360帐号可登录

您需要 登录 才可以下载或查看,没有帐号?立即注册 qh360_login 

x
本帖最后由 angui 于 2017-4-2 22:31 编辑

Documentation 文件
Relevant documents around the Notified Body (AVCP 1+)
▪        Design information about affected cable types (data sheets) 结构数据表
▪        Documentation of selection of test samples 样品抽样文件
▪        Calculation of cable parameters and sample selection     EXAP report EXAP 报告
•        Material overview 材料概述
▪        Test reports of the relevant tests 相关测试项目的测试报告
▪        Evaluation of test results according to EXAP (safety margins ) EXAP report EXAP 报 告
▪        Classification report 燃烧等级分类报告
▪        Report on initial inspection 首次审厂报告
▪        Certificate („certificate of constancy of performance“) 证书


Documentation – Material overview
Material overview 材料概述
▪        Proposal of VDE for a transparent and comprehensive collection of all performed acidity tests according to EN 50267-2-3 (therefore only relevant for additional classification
acidity) 酸性气体含量
▪        Objectives: 宗旨
•        Avoid unnecessary multiple measurements 避免不必要的重复测试
•        Agree on clear rules for the “shelf life” of test results 对测试数据有效期取得一致意见


Documentation

Relevant documents around the Notified Body (AVCP 1+)
▪        Design information about affected cable types (data sheets)
▪        Documentation of selection of test samples
•        Calculation of cable parameters and sample selection     EXAP report
•        Material overview
▪        Test reports of the relevant tests
▪        Evaluation of test results according to EXAP (safety margins ) EXAP report
▪        Classification report
▪        Report on initial inspection
▪        Certificate („certificate of constancy of performance“)


Documentation – Classification Report
Classification Report 燃烧等级分类报告
▪        Template in EN13501-6 模板
▪        Details: see VDE-Document

Documentation
Relevant documents around the Notified Body (AVCP 1+)
▪        Design information about affected cable types (data sheets)
▪        Documentation of selection of test samples
•        Calculation of cable parameters and sample selection     EXAP report
•        Material overview
▪        Test reports of the relevant tests
▪        Evaluation of test results according to EXAP (safety margins ) EXAP report
▪        Classification report
▪        Report on initial inspection
▪        Certificate („certificate of constancy of performance“)


Documentation – Certificate
Certificate
▪        Template and rules in Advisory Group Document NB-CPR 14-612r3 Issuance of certificates under CPR 模板
▪        No limitation of validity of certificate 证书没有有效期
▪        Issue not before notification has taken place (naming in NANDO list)
▪        Aspect under discussion: „Certificates Type B“
•        Manufacturer A produces cables and puts them on the market with label A. He has performed the required tests according to COR and has a certificate from VDE
•        Manufacturer A produces the same cables also for manufacturer B, with label B. How can manufacturer B obtain the mandatory certificate?
− Use of the certificate of A (where also the label B would have to be listed)     most presumably not wanted
− Apply for an own certificate from VDE:
▪        B also acts as manufacturer, in line with CPR Art.2.
▪        The correct production site (from A) has to be listed in the certificate
▪        An agreement with A has to be found (due to inspection, )
▪        Use of test results from A should be possible
▪        Certificate of B depends on certificate of A
  Check, if this procedure is allowed

VDE – Your reliable Partner for Testing and Certification
您需要登录后才可以回帖 登录 | 立即注册 qh360_login 

本版积分规则

关闭

快领红包上一条 /2 下一条

免费送金钱 安规仪器 测试耗材 积分充值 证书查询 机构导航 安规标志 美华博客 焦点图片 标准搜索 论文搜索 高级搜索 其它工具
快速回复 返回列表 返回顶部